This author has not written his bio yet.
But we are proud to say that dev contributed 6 entries already.
Lightweight EIFS cladding systems in Australia are generally available in two configurations — cavity and non-cavity — and the difference between them matters a lot more than most builders realise at first glance. Choosing the wrong configuration for a given site’s climate and moisture exposure can mean anything from a straightforward compliant install to an […]
R-value gets mentioned constantly in cladding and insulation marketing, but a surprising number of builders and specifiers couldn’t confidently explain what the number actually measures, or why one wall system’s R-value might be meaningfully different from another’s. With energy efficiency requirements tightening across every Australian state, understanding R-value properly isn’t optional anymore — it’s part […]
If you’ve spent any time researching lightweight cladding or exterior wall systems in Australia, you’ve almost certainly come across the term “CodeMark certified.” It gets used a lot — sometimes as a genuine mark of compliance, sometimes as little more than a marketing line. For builders, developers, and specifiers, understanding what CodeMark actually is, and […]
Building in a bushfire-prone area in Australia comes with a specific set of construction requirements — and one of the most important is the Bushfire Attack Level, or BAL, rating that applies to a given site. For builders and specifiers working across Victoria, New South Wales, and South Australia, understanding how BAL ratings work — […]
EIFS — External Insulation Finishing Systems — is the category of lightweight cladding system that has become the standard specification for energy-efficient residential and commercial construction across Australia. If you’ve worked on a project involving lightweight EPS cladding boards with a rendered finish, you’ve worked with EIFS. If you’re researching alternatives to brick veneer that […]
For most of the past five decades, brick veneer was the default exterior wall system on Australian residential construction. It was familiar, widely available, and understood by builders, surveyors, and applicators across the country. That default has shifted. Lightweight EIFS cladding systems now compete directly with brick veneer on cost, outperform it significantly on energy […]
| 2/54-56 Cavan Road, Dry Creek, SA, 5094 |
| (08) 8262 7900 |
| urwsasales@unitex.com.au |
| 14 Artisan Road, Seven Hills NSW 2147 |
| 1800 RENDER |
| customerservice-nsw@unitex.com.au |
| Head Office Warehouse, 96 Prosperity Way, Dandenong, VIC 3175 |
| (03) 9768 4900 |
| sales@stoaustralia.com.au |
